KING NOZZLE SHOPPING SITE
TYPE-F
TYPE-F
Type name： TYPE-F
Spray shape: Hollow cone
Spray direction: angled
Mounting screw： 3/8" female thread
Material: PP (Polypropylene)
Applications: Ideal for cooling and humidifying. Also suitable for air cleaning, air washers, scrubbers, etc., and foam suppression in sewage treatment plants, etc.
Features
This is a basic type of hollow cone atomizing nozzle. The center of the mounting screw and the center of the atomizing port are on the same center, but the body orifice is eccentric to them.
Others
In this catalog, the performance table is divided into "wide angle" and "shallow angle" with the atomizing angle of 85° at 0.2MPa as the border.
Combination
There are four types of bodies, with "TYPE-F" stamped on the back side and a symbol indicating the body orifice diameter in the circle above it, where L indicates φ3mm, M indicates φ4mm, P indicates φ6mm, and Q indicates φ7mm. There are six types of atomizing orifice. Numbers representing the orifice diameter are written in a circle on the cap portion, indicating φ2.3mm, φ3.1mm, φ3.9mm, φ5.1mm, and φ5.9mm as they are. Various spray angles and water volumes can be obtained by combining these bodies and caps.
If you would like more than the maximum quantity, please click here.
If you would like more than the maximum quantity, please click here.
Please Contact us.
If you wish to use a shipping method other than EMS
If you wish to use a shipping method other than EMS
If you would like to use a shipping method other than EMS, please Contact Us.
Worldwide Shipping
Worldwide Shipping
In addition to the shipping fee, customs duties and customs clearance fees may apply, and these additional costs must be borne by the customer.
Performance & Dimension
＊Dimension : general tolerance
＊ Performance : All figures in above table are based on actual value tested, but not guaranteed.
※The number in brackets () in the body symbol indicates the body orifice bore diameter.
※Spray angle: 0.05 MPa does not result in a perfect spray, therefore data at 0.1 MPa is shown.
＊Dimension : general tolerance
＊Performance : All figures in above table are based on actual value tested, but not guaranteed.
※The number in brackets () in the body symbol indicates the body orifice bore diameter.
※Spray angle: 0.05 MPa does not result in a perfect spray, therefore data at 0.1 MPa is shown.
Type name description: F-2.3L is type-F and represents the combination of a cap with a spray orifice diameter of Φ2.3 mm and a body with a body orifice diameter L (= Φ3 mm).